Serbaglaze

Product Description

This is a solvent based, clear, moisture triggered aliphatic polyurethane. Formulated to give outstanding UV Stability and adhesion. Long term protection for overcoating glass or plastic roof lights, providing a tough transparent membrane which imparts shatter resistance to glass and renews old or oxidized plastics.

Surface Preparation

All surfaces must be clean, sound and free from all surface contamination. Remove oil or grease using Thinner No 1 or Serba clean or a strong solution of detergent followed by washing with clean water. Fungal mould or lichen must be removed, addition protection against fungal spores can be achieved by applying Serba Fungal Wash. Where treatment includes glazing bars or window frames, ensure that they are clean, dry and free from loose debris, surface contamination or poorly adhered paint.

Priming

Most substrates do not require priming, pull off adhesion tests should be carried out prior to application of coating, this ensures adequate adhesion is achieved. Serba P U Primer is suitable for most substrates. For unusual, difficult substrates contact the technical department for advice on alternative primers.

Application

Can be applied by brush, roller or airless spray. If application is by airless spray, the coating must be de-aerated using a spiked roller. Apply at a maximum of 0.5ltrs per sq. mtr. per coat. Brush application is best achieved in two coats applied in different directions. Use a soft nylon or bristle brush. Roller application is again best in two coats. Use a medium pile sheepskin roller.

Properties

AppearanceGloss
ColoursClear
Volume Solids80%
Typical Thickness0.8mm
ThinnersDo not thin
CleanerThinner No. 1
Shelf Life6 months
Drum Sizes5 and 20 Litre
Drying TimesAt 20°C Touch dry : 3-8 hours. Hard dry : 12 hours
OvercoatingAt 20°C Min : 6 hours. Max : 48 hours

Product Reference No. 4080 Revision Date : August 2002

Roof Skylight Protective Coating System ...

SERBA COATINGS
UNIT 6, WILLIAM STREET, NORTHAM, SOUTHAMPTON, HANTS, SO14 5QH
TEL: 023 80223266 EMAIL: sales@serbacoatings.co.uk FAX: 023 80233566

The claims made in this document are made in good faith and are based on exhaustive tests carried out over a long period.
Serba Coatings, their agents and their distributors cannot accept any liability for the behaviour of their materials in individual cases.

A printer friendly copy is available here