Serba Coatings, Unit 6 William Street, Northam, Southampton, Hants. S014 5QH Tel: 023 80 223266 Fax: 08700 527587

1. Identification of Substance / Preparation

   Substance: Quickstop

2. Composition/Information on Ingredients

   Hazardous Contents:
   

   Ingredient Name	Cas No	Weight %	R Phrases
   Polymers,Resins and other Additives, Non Hazardous		to 100
   Propylene Glycol Monomethyl
   Ether Acetate	108-65-6	25-50	10
   Chlorinated Paraffin (C10-C13)	71-36-3	>1	40-50/53

3. Hazards Identification

   Flammable (R10)

4. First Aid Measures

   General

   In all cases of doubt or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious person.

   Inhalation

   Remove patient to fresh air. Keep warm and at rest. Seek medical advice.

   Ingestion

   Do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention.

   Skin

   Remove contaminated clothing. Wash the skin immediately with soap and water. Do not use solvents to clean skin. Seek medical attention if irritation persists.

   Eyes

   In case of contact with eyes, rinse immediately with plenty of water and seek medical advice (S26).

5. Fire Fighting Measures

   In case of fire use water spray or fog, alcohol resistant foam, dry chemical or carbon dioxide (S43). In case of fire, do not breathe fumes.

6. Accidental Release Measures

   Shut off all ignition sources. Ventilate area. Absorb spillage in suitable inert material. Sweep or shovel up spillage and remove to a safe place. Use non-sparking hand tools. Wear protective clothing as per section 8.

7. Handling and Storage

   Handling

   Do not breathe vapour fumes (S23). Use only in well ventilated areas (S51). Avoid contact with skin / eyes. Keep away from sources of ignition.

   Storage

   Keep container tightly closed (S7). Store above 5°C. Do not store above 30°C.

8. Exposure Controls and Personal Protection

   Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended). In case of insufficient ventilation, wear suitable respiratory equipment (S38).

9. Physical and Chemical Properties

   Appearance	Liquid, coloured paste, miscible with most organic solvents
   Odour	Smells of solvent
   Melting Point	N/A
   Boiling Point	N/A
   PH:	n/a
   Flash Point	42°C
   Auto ignition point	Not known
   Vapour Density	Not known
   Specific Gravity	1.102 g/cm³
   Solubility	Insoluble in water
   Viscosity	Not known.
   Hazards	Flammable (R10)

10. Stability and Reactivity

    Stable. In use, may form flammable / explosive vapour-air mixture (R18). Incompatible with organic peroxides.

11. Toxilogical Information

    Vapours or aerosols may cause irritation of the eyes, nose and respiratory tract. Prolonged skin contact will result in defatting of the skin leading to irritation and in some cases, dermatitis. Inhalation of solvent vapours may give rise to nausea, headaches and dizziness.

12. Ecological Information

    Not readily biodegradable. Marine pollutant.

13. Disposal Considerations

    Disposal should be in accordance with local, state or national legislation.

14. Transport Information

    UN No:	3080		Packing Group:	III		Hazard Class:	3.3
    IMDG UN No:	1263		Hazard Class:	3.3		Page No:	3372-
    Packing Group:	III		EmS:	3-05		MFAG:	310/3
    ICAO UN No:	1263		Hazard Class:	3		Packing Group:	III
    Marine Pollutant
    Not classified as hazardous for road transport.
    Not classified as hazardous for rail transport.

15. Regulatory Information

    Risk Phrase: R10, Safety Phrases S16-23 (vapour) - 36/37/39/51.

16. Other Information

    The data and advice given apply only when the product is used for the stated application.

The information contained in this safety data sheet is provided in accordance with the requirements of the Chemicals (Hazard Information and Packaging) Regulations. The product should not be used for purposes other than those shown in Section 1 without first referring to the supplier and obtaining written instructions. As the specific conditions of use of the product are outside of the suppliers control, the user is responsible for ensuring that the requirements of relevant legislation are complied with. The information contained in this safety data sheet is based on the present state of knowledge and current national legislation. It provides guidance on health, safety and environmental aspects of the product and should not be construed as any guarantee of technical performance or suitability for particular applications.

A printer friendly copy is available here

A Technical Reference Datasheet is available here