S R Floorpaint

For Concrete and Wooden Floors

Introduction

S R Floorpaint gives outstanding performance as a protective coating on most types of floor, both internally and externally. It is quick, easy and inexpensive to apply. The modified synthetic rubber resins on which it is based are tough yet flexible and provide a hard wearing surface, resistant to common chemicals and oils. The smooth surface of S R Floorpaint is hygienic and easy to clean and will prevent problems of dusting and staining. It is available in an attractive range of colours which dry to a mid-gloss finish, whilst for that extra showroom shine, an optional clear surface glaze is also available.

Quick-drying S R Floorpaint is recommended to protect garage and factory floors where minimum time is available for shutdown. Floors can be painted quickly and easily over a weekend by unskilled labour and be ready for use on Monday morning.

Typical areas of use

Ideal for use on floors in:

• Garages
• Showrooms
• Workshops
• Warehouses
• Canteens
• Many other medium wear areas (inside and out).

The Weekend Protector

Friday pm	Preparation, fill and clean
Saturday	Apply first coat
Sunday	Apply final coat
Monday am	Move back in

Surface Protection

The more thorough the preparation, the better the performance. All surfaces must be dry and thoroughly clean, free from dust, dirt, oils and greases. Concrete floors should be cleaned with Polybond Concrete Cleaner. Existing paintwork should be scraped back to a firm edge and bare areas patch primed prior to the main application. A 'patch' test must be carried out over existing paint to ensure compatibility.

Application

Concrete and other porous floor areas should be coated with a first coat of S R Floorpaint to which 10% Thinners have been added. Metal floors or decking must be primed with either Glopane Universal or Chlorinated Rubber Zinc Phosphate Primer.

S R Floorpaint is ready for use after thoroughly stirring and can be applied by brush, roller, conventional or airless spray methods. For maximum performance, two full bodied coats are recommended. Problem areas that are constantly wet or immersed can be coated with S R Floorpaint - Deck Finishing system to provide the perfect non-slip working environment. Simply sprinkle a fine sharp sand into the first coat of S R Floorpaint whilst it is still wet. Brush away the loose excess before applying the second full bodied coat.

Properties

Chemical Resistance	S R Floorpaint when cured will withstand freshwater, seawater, milk, acids, alkalis, diesel oil, mineral oils, greases, fats, kerosene. It will resist splashes of petrol and hydraulic fluids
Heat Resistance	65°C (150°F) Dry. 40°C (105°F) Wet
Condition	Single pack material ready for use after stirring
Storage Life	Indefinite, will not sediment unduly, nor form a surface skin
Touch Dry	Less than one hour
Hard Dry	Overnight
Re-Coat	Minimum 6 hours (spraying), 24 hours (brushing)
Coverage	Pigmented : 7² / litre. Clear Glaze : 8.5² / litre
Pack Size	2.5, 5 and 25 litres
Colour Range	Tile Red, Sandstone, Dark Green, Grey and Clear

Health and Safety

When dealing with the application of liquid material it must be noted that this product has a flashpoint of 39°C (102°F) and should only be used away from possible sources of ignition. Attention must be given to industrial hygiene, extraction of vapours and fire precautions. Personnel should be informed of any handling requirements.

Outstanding Performance inside and out

The claims made in this document are made in good faith and are based on exhaustive tests carried out over a long period.
Polybond Ltd., their agents and their distributors cannot accept any liability for the behaviour of their materials in individual cases.

A printer friendly copy is available here

A Health and Safety Reference Datasheet is available here