POLYBOND Polybond Limited, Unit 6 William Street, Northam, Southampton, Hants. S014 5QH Tel: 023 80 223266 Fax: 08700 527587 |
Q19 The Brush Applied DPM System
Epoxy DPM Membrane
A fast and easy solution for tackling damp concrete. Q19's unique formula is based on a tough, durable epoxy resin which is simply brush applied. It can provide a 100% waterproof barrier.
Incredibly Tough
The durability and effectiveness of Q19 Epoxy Paint has been proved regularly in heavy industrial use, in underground tunnels, cellars, vaults, flooring contracts etc for over 25 years!
Q19 Penetrates
One of the secrets of its success is that it penetrates and adheres tenaciously to concrete floors. It even works when applied to damp surfaces cutting down waiting times. Q19 becomes part of the surface to which it is applied.
Avoids Having To Raise Floors
When installing a new or replacing a damaged DPM, use Q19 Clear usually the 90/90 method is used i.e. first coat (always clear) is applied horizontally. Leave overnight then apply a second coat vertically to finish. Redecorate after 2 to 3 days (longer in colder weather). This will enable you to lay your new floor covering without the disruption and cost of having to raise the floor levels.
Use on All Types Of Surface
The product is ideal for use in basements, cellars, kitchens, bathrooms, workshops, greenhouses and older properties. Also on working walls in farm buildings, milking parlours, food factories, breweries, abattoirs, hospitals, canteens and kennels etc as well as many more domestic and industrial applications.
The Q19 DPM Insurance
Q19 is ideal for use under thermoplastic tiles, block floors, linoleum, strip flooring and carpets. It prevents moisture damaging costly floor finishes.
Easy Application
Safe and easy to apply by brush, roller or spray gun and no messy, smelly clean up problems. Just wash out with water. Apply a minimum of two coats leaving overnight between coats and allow to cure for a minimum of 3 days before covering, 4 to 5 days if using solvent based adhesives. Coverage approx 6 to 8m² per litre per coat depending on surface porosity. See Technical Data Sheet for further full information.
The Epoxy DPM
Simply Brush On And Stay Dry
|
Polybond Ltd Unit 6, William Street, Northam, Southampton, Hampshire, SO14 5QH
|
The claims made in this document are made in good faith and are based on exhaustive tests carried out over a long period.
Polybond Ltd., their agents and their distributors cannot accept any liability for the behaviour of their materials in individual cases.
![]() |
![]() |
![]() |