POLYBOND
Polybond Limited, Unit 6 William Street, Northam, Southampton, Hants. S014 5QH
Tel: 023 80 223266 Fax: 08700 527587
Tel: 023 80 223266 Fax: 08700 527587
POLYBOND
Polybond Limited, Unit 6 William Street, Northam, Southampton, Hants. S014 5QH
Tel: 023 80 223266 Fax: 08700 527587 | |
| Material Safety Data Sheet | Revision No.3/2002 | |
| Suppliers Name and Address: Polybond Limited Unit 6, William Street, Northam Southampton, Hants. S014 5QH Tel: 023 80 223266 Fax: 08700 527587 |
|
1/1 Chemical Nature: Solvent Based Chlorinated Rubber type paint containing plasticiser and inert
pigments1/2 Company: As above
2/1 Contains: Mixture of petroleum hydrocarbons, sythetic rubber and inert pigments
2/2 EEC Symbol:
2/3 R Phrases: Flammable, Irritating to the eyes.
4/1 Skin Contact: Wash off with soap and plenty of water. Remove contaminated clothing and wash before re- use.
4/2 Eye contact: Flush eyes with plenty of clean water for at least 15 minutes. Seek medical advice.
4/3 Inhalation: In case of over exposure to vapours move patient to fresh air, keep him warm. If loss of consciousness occurs, oxygen may be given and immediately seek medical advice.
4/4 Ingestion: Do not induce vomiting as aspiration may be caused - milk or liquid paraffin may be given. Aspiration into the lungs is highly dangerous and may rapidly inflame the lung tissue resulting in pneumonitis. Medical attention should be sought.
5/1
5/2 Extinguishing Media: co² or dry Powders.
5/3 Unsuitable Extinguishing Media: Water
5/4 Exposure Hazards: A potentially explosive mixture at high temperatures Produces noxious and toxic fumes.
6/1 Personal Precautions: Avoid contact with the eyes, skin and clothing. Avoid breathing vapours.
6/2 Environmental Precautions: Prevent from entering the drains.
6/3 Methods for Cleaning: Soak up with an inert absorbent material ie sawdust or sand. Remove to a secure place.
7/1 Handling: Provide good ventilation if using indoors. All equipment should be flame proof .Avoid all contact with skin and eyes.Keep all containers away from all sources of ignition. If spraying, wear suitable respiratory equipment.
7/2 Storage: Store in secure containers, clearly labelled well away from any sources of ignition.
8/1 Limits: HSE EH/40: Short term: 125 p.p.m. ( 10 minute TWA) Long term: 100 p.p.m. (8 hour TWA)
8/2 Respiratory Protection: Use in well ventilated areas. Wear respirator with a type `A `filter.
8/3 Hand Protection: Wear barrier creams and protective gloves.
8/4 Eye Protection: Safety goggles should be worn.
8/5 Skin Protection: Wear long sleeved clothing and barrier creams on exposed skin.Never use solvents to remove paint from skin
| Appearance: Liquid Paint | Odour: Sweet solvent smell | |
| Melting Point: 160°C | Density: | |
| Oxidising: | Flashpoint: Flammable 40°C Abel | |
| Boiling Point: 160°C | Ignition: 500°C | |
| Solubility in Water: None | pH Value: | |
| Vapour Pressure: | Viscosity: |
10/1 Thermal Decomposition:
10/2 Conditions to Avoid:
10/3 Hazardous Decomposition:
11/1
11/2 Eye Contact: Severe irratation.
11/3 Skin Contact: May cause dermatitis.
11/4 Ingestion:
11/5 Inhalation: Can cause inflammation of lung tissue resulting in Pneumonitis
12/1 Avoid sub-soil penetration. Do not let product enter drains.
13/1 Can be landfilled or incinerated when in compliance with local and national regulations. Dispose of in accordance with `Deposit of Poisonous Wastes` Act (1972)
14/1 RID/ADR: UN no.1263
15/1 Classification Symbol: Flammable Liquid.
15/2 Risk Phrases: Flammable: Irritating to the eyes.
| Polybond Limited March 2002 | Polybond SR Floor Paint and SR Line Paint |
Polybond Health and Safety
 A printer friendly copy is available here |
A Technical Reference Datasheet is available here  |