Rust Converter

Company : As above.

A vinyl acrylic coating with a chelating agent. Hazardous ingredients : Ethylene glycol butyl ether. CAS No : 111-76-2. WT(%) : 1. Exposure : 25ppm

Risk Phrases : None

Hazard designation : Not classified as hazardous based on consideration of the composition of this product. Use in a well ventilated area. May cause eye irritation. Avoid prolonged or repeated contact with skin. May cause mild skin irritation.

Skin Contact :Remove contaminated clothing. Wash skin with water. Seek medical attention if ill effects occur.

Eye Contact : Flush & irrigate eyes with plenty of clean water for at least 10 minutes. Seek medical assistance.

Inhalation : In case of over exposure to vapours move patient to fresh air, keep him warm. If loss of consciousness occurs, oxygen may be given and immediately seek medical advice.

Ingestion : Wash out mouth with water. Seek medical attention if ill effects occur.

Not classified as flammable. If involved in a fire, it may emit noxious fumes such as hydrogen chloride. Extinguishing Media : Foam, co², dry powder, water, spray.

Personal Precautions : Avoid contact with skin and eyes. Environmental Precautions : Do not release into the environment. Methods for Cleaning : Absorb spillage with sand, earth or other absorbent material. Transfer to a container for disposal. Flush remaining with water.

In accordance with "Flammable Liquids" regulations.

Handling : Do not ingest. Avoid contact with skin and eyes. Storage : Keep away from frost. Store between 5? and 30°C. High temperature may lead to accelerated settling.

Exposure Control : Wash hands with soap and water. Remove and wash contaminated clothing. Do not take internally, avoid contact with eyes, avoid prolonged or repeated contact with skin. Personal Protection : Observe good industrial hygiene and safety practices.

Respiratory Protection : During spray application, a particulate dust respirator should be used. Eye Protection : Wear safety goggles / glasses. Hand Protection : Gloves should be worn e.g. butyl or nitrile rubber gloves. Skin Protection : Wear suitable protective clothing.

Appearance: Coloured Liquid	Odour: Almost odourless
pH: 2.0	Density: 1.3 @ 20°C
Oxidising: None known	Flashpoint: n/a
Boiling Point: n/a	Melting Point : n/a
Solubility in Water: Miscible (dry film Insoluble)	Solubility Other : n/a
Solids Content: approx 40%	Viscosity (cP) : 6000 @ 20°C

10/1 Thermal Decomposition:

Hazardous reactions: None known. Hazardous decomposition Products: None known.

Inhalation : Unlikely to be hazardous by inhalation. Ingestion : Unlikely to be hazardous if swallowed. Eye Contact : May cause eye irritation. Skin Contact : Repeated or prolonged contact may cause irritation.

Does not contain heavy metals. No other applicable data.

Waste materials should be collected and coagulated with calcium chloride. The supernatant liquid can be run to drain. The coagulated solids can be treated as solid waste and disposed of in accordance with local or national legislation.

Not classified as dangerous for transport.

Classification : Not classified as dangerous for supply / use.

Risk Phrases : -