1/1 Chemical Nature: Two Part Epoxy- Polyamide resin paints dispersed in water. 1/2 Company: As above.

2/1 Contains: Liquid epoxy resins in hardener component Liquid polyaminoamide dissolved in water in base component.

2/2 EEC Symbol: Xi

2/3 R Phrases: 36, 38-34-51/53, S28. S37-39.

Irritating to the eyes and skin. May cause sensitisation by skin contact.

4/1 Skin Contact: Wash off with soap and plenty of water. Remove contaminated clothing and wash before re- use.

4/2 Eye contact: Flush eyes with plenty of clean water for at least 15 minutes. Seek medical advice.

4/3 Inhalation: Move to fresh air and seek medical advice.

4/4 Ingestion: Seek medical advice immediately Remove stomach content by gastric suction only as directed by a medical person. Do not allow inhalation of vomit.

5/1 Base component will not burn, neither will mixed Q19.

5/2 Extinguishing Media: For Hardener component on its own:- Water, CO², Foam, Dry Powders.

5/3 Unsuitable Extinguishing Media: High volume water jet.

5/4 Exposure Hazards: Produces noxious and toxic fumes.

6/1 Personal Precautions: Avoid contact with the eyes, skin and clothing.

6/2 Environmental Precautions: Prevent from entering the drains.

6/3 Methods for Cleaning: Soak up with an inert absorbent material. Remove to a secure container for disposal.

7/1 Handling: Provide good ventilation in working areas. Avoid formation of aerosols. If spraying, wear suitable respiratory equipment.

7/2 Storage: Keep away from food, drink and animal feedstuffs. Keep containers tightly closed and store at room temperatures

8/1 Limits: None applicable

8/2 Respiratory Protection: In case of insufficient ventilation wear suitable respiratory equipment.

8/3 Hand Protection: Wear barrier creams and protective gloves.

8/4 Eye Protection: Safety glasses or goggles should be worn.

8/5 Skin Protection: Wear long sleeved clothing and barrier creams on exposed skin.

Appearance: As an Emulsion Paint	Odour: Faintly sweet, ammoniacal
Melting Point:	Density: Approx. 1.35
Oxidising: Flashpoint: Non- Flammable
Boiling Point:	Ignition: None
Solubility in Water: Completely	pH Value: Alkaline
Vapour Pressure: As water.	Viscosity:

10/1 Thermal Decomposition: Not applicable to mixed liquid material.

10/2 Conditions to Avoid: Strong acids and oxidising agents.

10/3 Hazardous Decomposition: Oxides of carbon and nitrogen from final dried film.

11/1 LD% Acute Oral Toxicity in Rats: > 2000mg/kg (Estimate)

11/2 Eye Contact: Severe irratation.

11/3 Skin Contact: Moderately irritant, possibly sensitising.

11/4 Ingestion:

11/5 Inhalation:

12/1 Avoid sub-soil penetration. Do not let product enter drains.

13/1 Can be landfilled or incinerated when in compliance with local and national regulations.

14/1 Not regulated

15/1 Classification Symbol: Xi

15/2 Risk Phrases: R36-38, R28, S37-39