•  
    POLYBOND
    Polybond Limited, Unit 6 William Street, Northam, Southampton, Hants. S014 5QH
    Tel: 023 80 223266 Fax: 08700 527587

    Material Safety Data SheetRevision No.7/2001
     
    Suppliers Name and Address:
    Polybond Limited
    Unit 6, William Street, Northam
    Southampton, Hants. S014 5QH
    Tel: 023 80 223266 Fax: 08700 527587
    Product Name/s:
    Polybond Universal PVA<

    1. Substance/Preparation and Company Identification

      2. 1/1 Chemical Nature: Stable dispersion of inert polymer particles in water

      1/2 Company: As above.

    2. Main Constituents

      3. 2/1 Contains: Vinyl acetate homopolymer. Surfactants and colloids, ethylene and propylene glycol dibenzoates

      2/2 EEC Symbol: Nil

      2/3 R Phrases: None

    3. Hazard Identification

      4. Residual monomer: < 0.4% (wt)

    4. First Aid Measures

      4/1 Skin Contact: Wash off with soap and plenty of water.

      4/2 Eye contact: Flush eyes with plenty of clean water for 15 minutes. Seek medical advice.

      4/3 Inhalation: Remove to fresh air. Seek medical advice.

      4/4 Ingestion: Seek medical attention.

    5. Fire Fighting measures

      6. 5/1

      5/2 Extinguishing Media: Water

      5/3 Unsuitable Extinguishing Media: N/A

      5/4 Exposure Hazards: N/A 6

    6. Accidental Release Measures

      6/1 Personal Precautions: Avoid contact with the eyes, skin and clothing. Wash from skin

      6/2 Environmental Precautions: Contain and absorb the spill with sand and transfer to containers for recovery or disposal.

      6/3 Methods for Cleaning: Use brooms and or squeeges.

    7. Handling and Storage
      8. >

      7/1 Handling: No special precautions needed

      7/2 Storage: Protect from frost and freezing conditions.

    8. Exposure Controls/Personal Protection

      9. 8/1 Limits: None established - only applicable to trace components. Observe good housekeeping.

      8/2 Respiratory Protection: Ensure good ventilation

      8/3 Hand Protection: Wear barrier creams and protective gloves.

      8/4 Eye Protection: Safety goggles should always be worn if using overhead.

      8/5 Skin Protection: Use barrier creams on exposed skin.

    9. Physical and Chemical Properties of Liquid Product

      10. Appearance:White viscous liquidOdour: Faintly Sweet smelling
      Melting Point: Density:
      Oxidising:Flashpoint: Non Flammable
      Boiling Point: Ignition:
      Solubility in Water: Completely soluble pH Value: 5.5
      Vapour Pressure: Viscosity:

    10. Stability and Reactivity

      11. 10/1 Thermal Decomposition:

      10/2 Conditions to Avoid:

      10/3 Hazardous Decomposition: Oxides of carbon, acetic acid.

    11. Toxicological Information on Mixed Liquid Material

      12. 11/1

      11/2 Eye Contact: Will cause slight irritation. Irrigate with plenty of clean water & seek medical attention.

      11/3 Skin Contact: Will cause slight irritation to some users. Wash with soap and water.

      11/4 Ingestion: LD50 acute oral toxicity in rats

      11/5 Inhalation:

    12. Ecological Information

      13. 12/1

    13. Disposal Considerations

      14. 13/1 Incinerate or landfill in accordance with local regulations.

    14. Transport Information

      15. Not regulated

      14/1

    15. Regulatory Information

      16. None required

      15/1 Classification Symbol:

      15/2 Risk Phrases:

    16. Other Information

      17. None
    This product should be stored and handled in accordance with good industrial hygiene practice and in conformity with any legal regulation. This information is to our best of knowledge correct and given in good faith but without warranty. It remains the users responsibility to ensure the information is appropriate for any particular use of the product.
    Polybond Limited March 2002Polybond Universal PVA

    Polybond Health and Safety