POLYBOND Polybond Limited, Unit 6 William Street, Northam, Southampton, Hants. S014 5QH Tel: 023 80 223266 Fax: 08700 527587

1. Substance/Preparation & Company Identification

   1. Chemical Nature: Stable dispersion of inert polymer particles in water.
   2. Company: As above.



2. Main Constituents

   1. Contains: Vinyl acetate homopolymer. Surfactants and colloids, ethylene and propylene glycol dibenzoates.
   2. EEC Symbol:
   3. R Phrases:



3. Hazard Identification

   Residual monomer: < 0.4% (wt)

4. First Aid Measures

   1. Skin Contact: Wash off with soap and plenty of water.
   2. Eye contact: Flush eyes with plenty of cold clean water for at least 15 minutes. Seek medical advice.
   3. Inhalation: Remove to fresh air. Seek medical advice.
   4. Ingestion: Seek medical attention.



5. Fire Fighting Measures

   2. Extinguishing Media: Water.
   3. Unsuitable Extinguishing Media: Not applicable
   4. Exposure Hazards: Not applicable



6. Accidental Release Measures

   1. Personal Precautions: Avoid contact with the eyes, skin and clothing. Wash from skin
   2. Environmental Precautions: Contain and absorb the spill with sand and transfer to containers for recovery or disposal.
   3. Methods for Cleaning: Use brooms and or squeeges.



7. Handling and Storage

   1. Handling: No special precautions needed
   2. Storage: Protect from frost and freezing conditions.



8. Exposure Controls/Personal Protection

   1. Limits: None established - only applicable to trace components. Observe good housekeeping.
   2. Respiratory Protection: Ensure good ventilation.
   3. Hand Protection: Wear barrier creams and protective glovess.
   4. Eye Protection: Safety goggles should be worn is using overhead.
   5. Skin Protection: Use barrier creams on exposed skin.



9. Physical and Chemical Properties of Liquid Product

   Appearance:	White Viscous liquid
   Odour:	Faintly sweet smelling
   Boiling Point:
   Density:
   Oxidising Properties:	None
   Flashpoint:	Non Flammable
   Melting Point:
   Ignition:
   Solubility in Water:	Completely
   pH Value:	5.5
   Vapour Pressure:
   Viscosity:

10. Stability and Reactivity

    1. Thermal Decomposition:
    2. Conditions to Avoid:
    3. Hazardous Decomposition: Oxides of carbon, acetic acid.



11. Toxicological Information on Mixed Liquid Material

    2. Eye Contact: Will cause slight irritation. Irrigate with plenty of clean water and seek medical attention.
    3. Skin Contact: Will cause slight irritation to some users. Wash with soap and water.
    4. Ingestion: LD50 acute oral toxicity in rats.
    5. Inhalation:



12. Ecological Information



13. Disposal Considerations

    1. Incinerate or landfill in accordance with local regulations.



14. Transport Information

    1. No special precautions are neccessary.



15. Regulatory Information No special hazard labelling is required.

    1. Classification Symbol:
    2. Risk Phrases:
    3. Safety:



16. Other Information

    None

This product should be stored and handled in accordance with good industrial hygiene practice and in conformity with any legal regulation. This information is to our best of knowledge correct and given in good faith but without warranty. It remains the users responsibility to ensure the information is appropriate for any particular use of the product.

Polybond Health and Safety

A printer friendly copy is available here

A Technical Reference Datasheet is available here