Acron Paints

QAD Self Priming Gloss

Prouct Function

QAD Self Priming Gloss is a high quality 1 hour alkyd synthetic enamel which requires no priming. Coatings offer fast surface drying even in thick films, minimum yellowing with outstanding film hardness and toughness. QAD Enamel can be used for heavy duty vehicle finishing as well as for vehicle repair work and due to its good resistance to oils, fats and cutting oils etc makes this an ideal choice for machinery enamel. It is flexible and gives good performance over both interior & exterior wood and metal surfaces. QAD Enamel can be applied direct on to unprimed surfaces in a single or two coat application eliminating the need for extra primers.

Surface preparation and Application

Surfaces must be thoroughly clean, dry, free from millscale, rust, oil, grease or other contaminants use degreasing thinners. Can be brushed, rollered or hot sprayed without the addition of thinners. For conventional air assisted spray - use 10 to 15% Universal Thinners.

Properties

Packaging2.5, 5 and 25 litres.
Flash PointMay occur between 22-22°C
StorageStable in original containers
CoverageBrush : 7-8m² per litre. Spray : 8 to 9m² per litre
Drying Times Surface Touch Dry : 30 minutes, Hard Dry : Overnight
Viscosity as suppliedApprox 3.0 poise ICI Cone & Plate Viscometer @ 25°C
Solids55% approx
OvercoatingTwo coats wet on wet are possible. Alternatively, leave overnight
ColoursAll colours available to BS 4800 or RAL ranges
NoteShould you wish to use extra primer please use QAD Gloss Enamel (data sheet available on request)
Revision Date : August 2003

For One Coat of Outstanding Toughness

Acron Paints
Unit 6, William Street, Northam, Southampton, Hampshire, SO14 5QH
Tel: 023 80223266sales@acronpaints.co.ukFax: 08700 527 587

The claims made in this document are made in good faith and are based on exhaustive tests carried out over a long period.
Acron Paints, their agents and their distributors cannot accept any liability for the behaviour of their materials in individual cases.

A printer friendly copy is available here A Health and Safety Reference Datasheet is available here