Acron Paints
QAD Self Priming Hammer Finish
Product Function
QAD Hammer is a high quality 1 hour alkyd synthetic enamel. Coatings offer fast surface drying even in thick films, minimum yellowing and outstanding film hardness and toughness. QAD Hammer can be used for heavy duty vehicle finishing as well as for vehicle repair work. Due to its good resistance to oils, fats and cutting oils etc., QAD Hammer is an ideal choice for machinery enamel. It is flexible and gives good performance over both interior and exterior wood and metal surfaces. Excellent results are achieved when applied to MDF. QAD Hammer can be applied direct on to unprimed surfaces in a single or two coat application.
Surface Preparation and Application
Surfaces must be thoroughly clean, dry, free from millscale, rust, oil, grease or other contaminants, use degreasing thinners. Can be brushed, rollered or hot sprayed without the addition of thinners. For conventional air assisted spray, use 10 to 15% Universal Thinners.
Priming
If priming is required :
- Mild Steel: Zinc Phosphate Primer
- Aluminum: Two Pack Etch Primer
- Stainless Steel and Zintec: Single Pack Etch Primer
Properties
| Packaging | 2.5, 5 and 25 litres. |
| Storage | Stable in original containers. |
| Coverage | Brush: 7 to 8m² per litre. Spray: 8 to 9m² per litre. |
| Flash Point | Between 20 to 22°C. |
| Drying Times | Surface Touch Dry : 30 minutes
Hard Dry : Overnight |
| Colour Range | All colours available to BS4800 or RAL rangess. A colour matching service may be available for some orders. |
| Viscosity as supplied | Approx 3.0 poise ICI Cone and Plate Viscometer at 25°C. |
| Solids | 55% approx. |
| Overcoating | Not Neccesary. |
Product Reference No. QAD. Issue Date August 2002
Outstanding Hardness and Toughness
Acron PaintsUnit 6, William Street, Northam, Southampton, Hampshire, SO14 5QH
|
The claims made in this document are made in good faith and are based on exhaustive tests carried out over a long period.
Acron Paints, their agents and their distributors cannot accept any liability for the behaviour of their materials in individual cases.
A printer friendly copy is available here