Acron Paints
AP2 High Build Zinc Phosphate Primer
Product Function
An alkyd resin based air dry primer. The product adheres well and provides protection to correctly prepared steel surfaces [before over-coating takes place). AP2 High Build Zinc Phosphate is suitable for application by spray, brush or roller (depending upon area size) This is a hard-wearing primer which is economical as the paint is still useable once the pot has been opened.
Surface Preparation and Application
Surfaces to be coated must be dry and clean ensuring that no grease remains. Degreasing may be carried out using Universal Thinners. Maximum efficiency will be achieved using vapour degreasing. The product can be applied using conventional or airless spray equipment and can be adjusted for use with electrostatic spray equipment. Conventional spraying requires the paint to be thinned to a viscosity of 30 to 50 seconds at ambient temperature, or 10% by volume.
Priming
- Mild Steel: Two Pack Self Etching Primer, AP1 Red Oxide Primer or Zinc Rich Primer
- Aluminium: Two Pack Self Etching Primer
- Stainless Steel and Zintec: Single Pack Etch Primer
Properties
| Volume Solids | Typical values of 58-65% dependant upon viscosity. |
| Cleaning | Universal Thinners for cleaning os spray gun, roller or brush. |
| Product Weight | 1.46Kg/litre may vary with colour. |
| Colours | Red Oxide, Grey, White, Black and Buff. Low Sheen. |
| Packaging | 1, 2.5 and 5 litres. |
Product Reference No. AP2 Issue Date August 2002
Hard Wearing and Economical
Acron PaintsUnit 6, William Street, Northam, Southampton, Hampshire, SO14 5QH
|
The claims made in this document are made in good faith and are based on exhaustive tests carried out over a long period.
Acron Paints, their agents and their distributors cannot accept any liability for the behaviour of their materials in individual cases.
A printer friendly copy is available here