Acron Paints Acron Paints, Unit 6 William Street, Northam, Southampton, Hants. S014 5QH Tel: 023 80 223266 Fax: 08700 527587

1. Identification of Substance

   Single Pack Etch Primer

2. Composition/Information on Ingredients

   Hazardous Ingredients	CAS No.	%
   Xylene	1330-20-7	10 to 30
   Butanone	78-93-3	5 to 10
   n-Butanol	71-36-3	10 to 30
   n-Butyl Acetate	123-86-4	5 to 10

   OES Mixture : LTEL 8 hours - 100ppm (400mg/m³). STEL 10 minutes - 150ppm (500mg/m³)
   Non Hazardous Components : Resins, organic or inorganic pigments without lead or chromium.

3. Hazards Identification

   COSHH Assessment

   Maintain adequate ventilation and / or extraction to maintain vapour below OES or respiratory equipment will be required.

   Overexposure Effects

   Skin Contact

   Will defat the skin causing irritation and redness after prolonged or repeated contact. Risk of solvent absorption into the bloodstream.

   Eye Contact

   Irritation.

   Ingestion

   Sore throat and symptoms of inhalation.

   Inhalation

   Excessive quantities may cause headaches and drowsiness. Continued exposure will have a narcotic effect leading eventually to unconciousness.

   Chip Labelling Info

   "Paint Preparation Containing Xylene (Mixed Isomers)".

   Risk Phrases

   • R11 Highly Flammable.
   • R20/31 Harmful by inhalation and in contact with skin.
   • R36/37/38 Irritating to the eyes, respiratory system and skin.

   Safety Phrases

   • S9 Keep container in a well ventilated place.
   • S16 Keep away from sources of ignition - no smoking.
   • S25 Avoid contact with the eyes.

   Symbol Required

   Highly Flammable and Harmful.

4. First Aid Measures

   Inhalation

   Move the exposed person to fresh air at once. Perform artificial respiration if breathing has stopped. Keep the affected person warm and at rest. Get prompt medical attention.

   Ingestion

   Rinse mouth thoroughly. Do not induce vomiting. Get medical attention immediately.

   Skin

   Remove affected person from source of contamination. Promptly wash contaminated skin with soap or mild detergent and water. Promptly remove clothing if soaked through and wash as above. Get medical attention promptly is symptoms occur after washing.

   Eyes

   Promptly wash eyes with plenty of water while lifting the eyelids. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.

5. Fire Fighting Measures

   Heating full containers will cause pressure rise with risk of bursting. Bursting cans can be forcibly ejected from a fire. Cans should be kept cool by using water spray. For liquid fire use Foam or CO2.

6. Accidental Release Measures

   Packaging limits significant releases. Spills may be contaminated and absorbed in sand or inert material. Minor spills may be allowed to evaporate. Larger releases should be contained for controlled disposal.

7. Handling and Storage

   Keep containers tightly closed in flammable store. Do not incinerate even when empty. Do not spray on or near a naked flame or incandescent material. Do not smoke, eat or drink whilst handling product. Prevent contact with eyes and skin.

8. Exposure Controls and Personal Protection

   Use gloves and overalls to prevent contact with skin and eyes. Always ensure good ventilation and avoid inhaling vapours. In areas where OES may be exceeded, a self contained breathing apparatus should be used.

9. Physical and Chemical Properties

   Appearance	Viscous Liquid		Flashpoint	5°C
   VOC Content	0.52 kg/l		S G	1.09 +/- 0.02 g/ml
   Explosive Limits in Air	>1.0% <11.0%		Solubility in Water	Insoluble

10. Stability and Reactivity

    Product is stable and is not considered to have dangerously reactive properties. Will dissolve some plastics materials. Avoid contact with oxidising agents.

11. Toxicological Information

    LD50 (Animal Ingestion) estimated from materials > 200mg/kg.

12. Ecological Information

    The product does not contain materials considered to have an adverse effect on the environment warranting specific controls. Contamination of land and water courses should be avoided.

13. Disposal Considerations

    Use licensed contractor for disposal by tipping or incineration.

14. Transport Information

    UN Number	1263		Packing Group	III		TREM Card	031
    IMCO Class	3.2		EMS	3-07		MFAG	300
    ADR Class	3 Item 31(C) 1		IATA Class	3

15. Regulatory Information

    The Chemicals (Hazard Information and Packaging for Supply) Regulations 1994 Chemicals (Hazard information and Packaging for Supply) Amendment Regulations 1996. The Carriage of Dangerous Goods by Road and Rail (Classification, Packaging and Labelling) Regulations 1994. Control of Substances Hazardous to Health Regulations 1988.

16. Other Information

    The information contained in this safety data sheet is provided in accordance with the requirements of the Chemicals (Hazard Information and Packaging) Regulations. The product should not be used for purposes other than those shown in Section 1 without first referring to the supplier and obtaining written instructions. As the specific conditions of use of the product are outside of the suppliers control, the user is responsible for ensuring that the requirements of relevant legislation are complied with. The information contained in this safety data sheet is based on the present state of knowledge and current national legislation. It provides guidance on health, safety and environmental aspects of the product and should not be construed as any guarantee of technical performance or suitability for particular applications.

Acron Health and Safety

A printer friendly copy is available here

A Technical Reference Datasheet is available here