Acron Paints

Acron Paints, Unit 6 William Street, Northam, Southampton, Hants. S014 5QH
Tel: 023 80 223266 Fax: 08700 527587

Material Safety Data SheetRevision No.3/2002
 
Suppliers Name and Address:
Acron Paints
Unit 6, William Street, Northam
Southampton, Hants. S014 5QH
Tel: 023 80 223266 Fax: 08700 527587
Product Name/s:
Mordant T Wash
  1. Identification of Substance

    Trade name: Mordant T Wash Coating compound/Surface Coating/Paint

  2. Composition/Information on Ingredients

    Mixture of substances listed below with nonhazardous additions.

    Dangerous Components
    CAS: 67-63-0
    EINECS:200-661-7
    Isopropanol
    F; R 11
    10 to 25%
    CAS: 107-98-2
    EINECS: 203-539-1
    1-methoxy-2-propanol
    R 10
    10 to 25%
    CAS: 7664-38-2
    EINECS: 231-6323-2
    Phosphoric Acid2.5-10%
    CAS: 12069-69-1
    EINECS: 235-113-6
    copper(II) carbonate--copper(II) hydroxide(1:1)
    Xn; R 22
    <2.5%

  3. Hazards Identification:

    Information concerning particular hazards for humans and the environment

    The product has to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version. R 11 Highly Flammable

    Classification system

    The classification is according to the latest editions of the EU lists, and extended by company and literature data.

  4. First Aid Measures

    Inhalation

    Supply fresh air, consult doctor in case of complaints

    Skin Contact

    Generally, the product does not irritate the skin

    Eye Contact

    Rinse opened eye for several minutes under running water, then consult a doctor

    Ingestion

    If systems persist consult doctor

  5. Fire Fighting Measures

    Suitable extinguishing agents

    CO², powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

    Protective equipment

    Wear breathing apparatus

  6. Accidental Release Measures

    Person-related safety precautions

    Wear protective equipment. Keep unprotected persons away.

    Measures for Environmental Protection

    Prevent seepage into sewage system, workpits and cellars. Dilute with plenty of water. Do not allow to enter sewers/surface or ground water.

    Measures for cleaning/collecting

    Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Ensure adequate ventilation

  7. Handling and Storage

    Handling

    Information for Safe Handling - Keep receptacles tightly sealed

    Information about fire and explosion protection - Keep ignition sources away. Do not smoke. Protect against electrostatic charges

    Storage:

    Requirements to be met by storerooms and receptacles Store in a cool location

    Information about storage in one common storage facility Not required

    Further information about storage conditions: Keep receptacle tightly sealed. Store in cool, dry conditions in well sealed receptacles

  8. Exposure Controls/Personal Protection

    Ingredients with limit values that require monitoring at the workplace:
    67-63-0 isopropanol
    OESLong-term value: 1920mg/m³, 1000ppm
    107-98-2 1-methoxy-2-propanol
    OESShort term value: 1120 mg/m³, 300ppm
    Long term value: 375 mg/m³, 100ppm
    7664-38-2 phosphoric acid
    OESShort term value: 2 mg/m³
    67-56-1 methanol
    OESShort term value: 333 mg/m³, 250ppm
    Long term value: 266 mg/m³, 200ppm
    Sk, ILV

    Personal Protective Equipment

    General protective and hygienic measures

    Wash hands before breaks and at the end of work.

    Respiratory protection

    Not required

    Protection of hands

    Protective gloves: Glove material has to be impermeable and resistant to the product/substance/preparation.

    Eye Protection

    Wear tightly sealed goggles

  9. Physical and Chemical Properties

    FormFluid
    ColourAccording to product specification
    OdourCharacteristic
    Melting Point/Melting RangeUndetermined
    Boiling Point/Boiling Range78°C;
    Flash Point13°C;
    Ignition Temperature270.0°C;
    Self-ignitingProduct is not self-igniting
    Danger of ExplosionProduct is not explosive. However, formation of explosive
    air/vapour mixtures are possible.
    Explosive Limits
    Lower:2.3 Vol %
    Upper:15.0 Vol %
    Vapour Pressure at 20°C;59.0 kPa
    Density ar 20°C;0.998 g/cm³
    Solubility in/Miscibility with waterFully miscible
    Solvent Content
    Organic Solvents33.2%
    Water56.9%
    Solids Content1.0%

  10. Stablity and Reactivity

    Thermal decomposition/conditions to be avoided

    No decomposition if used according to specifications.

    Dangerous Reactions

    No dangerous reactions known

    Dangerous Decomposition Products

    No dangerous decomposition products known.

  11. Toxicological Information

  12. Primary Irritant effect

    On the eye - No irritant effect

    On the skin - No irritant effect

    Sensitization - No sensitizing effects known

  13. Ecological Information

    General notes:

    Water Hazard Class 1 (German Regulation) (Self-assessment): slightly hazardous for water.
    Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system

  14. Disposal Considerations

  15. Product:

    Must not be disposed together with household rubbiush. Do not allow product to reach sewage system.

    Uncleaned Packaging

    Disposal must be made according to official regulations.

    Clean with water, if necessary together with cleansing agents.

  16. Transport Information

    Land Transport ADR/RID (cross border)
    ADR/RID Class3 Flammable Liquids
    Danger Code (kemler)33
    UN Number1263
    Packaging GroupII
    Hazard Label3
    Description of goods1263 Paint (vapour pressure at 50°C; at most 110 kPa)
    Maritime Transport IMDG
    IMDG Class3
    UN Number1263
    Label3
    Packaging GroupII
    EMS NumberF-E, S-E
    Marine PollutantNo
    Proper Shipping NamePaint
    Air Transport ICAO-TI and IATA-DGR
    ICAO/IATA Class3
    UN/ID Number1263
    Packaging Group3
    Proper Shipping NamePaint

  17. Regulatory Information

    Labelling according to EU guidelines

    This product has been classified and marked in accordance with EU Directives/Ordinance on Hazardous materials.

    Code Letter and hazard designation of Product

    F - Highly flammable

    Risk Phrases

    11 - Highly Inflammable

    Safety Phrases

    7/9Keep container tightly closed and in a well ventilated place
    16Keep away from sources of ignition - No smoking
    24Avoid contact with skin
    26In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
    45In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)
    60This material and its container must be disposed of as hazardous waste.
    Technical Instructions (air:)
    ClassShare in %
    Water56.9
    III33.2
    Water hazard class 1 (Self-assessment): slightly hazardous for water

  18. Other Information

    Relevant R-Phrases
    10Flammable
    11Highly Flammable
    22Harmful if swallowed
    23/24/25Toxic by inhalation, in contact with skin and if swallowed
    34Causes burns
    39/23/24/25Toxic: Danger of very serious irreversible effects through inhalation, in contact with skin and if swallowed
This product should be stored and handled in accordance with good industrial hygiene practice and in conformity with any legal regulation. This information is to our best of knowledge correct and given in good faith but without warranty. It remains the users responsibility to ensure the information is appropriate for any particular use of the product.
Acron Paints March 2002Mordant T Wash

Acron Health and Safety

A printer friendly copy is available here A Technical Reference Datasheet is available here