Acron Paints

Acron Paints, Unit 6 William Street, Northam, Southampton, Hants. S014 5QH
Tel: 023 80 223266 Fax: 08700 527587

Material Safety Data SheetRevision No.2/2002
 
Suppliers Name and Address:
Acron Paints
Unit 6, William Street, Northam
Southampton, Hants. S014 5QH
Tel: 023 80 223266 Fax: 08700 527587
Product Name/s:
Quick Drying
Hammer Finish
  1. Identification of Substance

    Quick-drying Hammer Finish. CAS NO : 1330-20-7, EINECS NO : 215-535-7.

  2. Composition/Information on Ingredients

    Composition : 60%.

  3. Hazards Identification

    Main Hazards

    Flammable. Harmful by inhalation and in contact with skin. Irritating to the skin.

  4. First Aid Measures

    Skin Contact

    In the case of skin contact, flood the splashed area with large quantities of running water.

    Eye Contact

    If the substance has entered the eyes, wash out with water or saline solution for at least 15 minutes.

    Ingestion

    If the chemical has been confined to the mouth, give large quantities of water as a mouth wash. Ensure that the mouth wash is not swallowed. If the chemical has been swallowed, give approx 250ml of water to dilute it in the stomach. In severe cases, obtain medical attention.

    Inhalation

    Remove the casualty out of the danger area after first ensuring your own safety. Loosen the patients clothing. If the casualty is unconscious, place in the recovery position and monitor breathing. Apply artificial respiration only if patient is not breathing. Seek medical attention when anyone has symptoms apparently due to swallowing or inhalation.

  5. Fire Fighting Measures

    Exposure Hazards

    Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Material is flammable.

    Suitable Extinguisher

    Extinguish with carbon dioxide, dry chemical, vapourising liquid or water-spray.

  6. Accidental Release Measures

    Leaks and Spills

    Absorb into dry earth or sand. Transfer to a closable salvage container for disposal by an appropriate method or retain for recovery.

    Clean up Procedures

    Transfer to sealed containers for disposal by approved method.

  7. Handling and Storage

    Handling Requirements

    Wear eye protection, gloves and protective clothing. When using do not smoke.

    Storage Precautions

    Store in a cool, dry, well ventilated area away from heat or other sources of ignition. Keep away from oxidising agents.

  8. Exposure Controls and Personal Protection

    Personal Protection

    Complete eye and face protection and gloves.

    Exposure Limits

    100ppm (435mg/m³)-TWA 150ppm (650) - 15 min.

    Type

    ORI.RAT 1.D50

    Toxicity

    4300 mg/kg

  9. Physical and Chemical Properties

    Appearance and OdourThixotropic liquid with characteristic odour. Boiling Point / Range138°C to 142°C
    SolubilityInsoluble in water. Miscible with alcohol and diethyl ether.Melting Point-95 °C
    Lower Explosive Limits1Upper Explosive Limits7
    Flash point24°CVapour Pressure6.2mm 20°C
    Relative Density0.99
  10. Stability and Reactivity

    Stability : Stable

    Avoid Contact With : Can react with oxidising materials. Nitration should be carefully controlled.

  11. Toxicological Information - Health Effects

    Skin

    Irritating to the skin, Prolonged contact may cause dermatitis. Harmful if absorbed through the skin.

    Eyes

    Irritating to the eyes.

    Inhalation

    Harmful if inhaled. Material is irritating to mucous membranes and the upper respiratory tract. Symptoms may include dizziness, headache, nausea and mental confusion. Prolonged inhalation may cause liver and kidney damage.

    Ingestion

    Harmful if swallowed. Ingestion may cause nausea, vomiting and symptoms of damage to the central nervous system. Ingestion of large amounts could cause kidney damage.

  12. Ecological Information

    Ecotoxicity

    Slightly toxic to freshwater fish and organisms. Moderately toxic to marine fish and organisms. Slightly toxic to mammalian wildlife.

    Persistance

    Biodegradable. Floats on water. Evaporates slowly. Causes oxygen depletion of surface waters. Low potential to bioaccumulate.

    Appraisal

    Data not available.

  13. Disposal Considerations - Waste Disposal : May be burnt in a chemical incinerator equipped with afterburner and scrubber. Where there is no incinerator site available, transfer waste solvent drum for collection by a specialist disposal company.

  14. Transport Information

    IMDG CodeUN NO : 1263Packing GroupIIIClass3.3
    ADR/RIDSubst. ID No. 1263Class + Item No.3.31(c).IATA/ICAOUN NO : 1263

  15. Regulatory Information

    Classification

    Harmful-Flammable.

    Risk Phrases

    Safety Phrases

  16. Other Information

    Volitile Organic Content (VOC) : 539 grammes per litre.

The information contained in this safety data sheet is provided in accordance with the requirements of the Chemicals (Hazard Information and Packaging) Regulations. The product should not be used for purposes other than those shown in Section 1 without first referring to the supplier and obtaining written instructions. As the specific conditions of use of the product are outside of the suppliers control, the user is responsible for ensuring that the requirements of relevant legislation are complied with. The information contained in this safety data sheet is based on the present state of knowledge and current national legislation. It provides guidance on health, safety and environmental aspects of the product and should not be construed as any guarantee of technical performance or suitability for particular applications.

Acron Paints October 2002Quick Drying Hammer Finish

Acron Health and Safety

A printer friendly copy is available here A Technical Reference Datasheet is available here