Acron Paints

Acron Paints, Unit 6 William Street, Northam, Southampton, Hants. S014 5QH
Tel: 023 80 223266 Fax: 08700 527587

Material Safety Data SheetRevision No.3/2002
 
Suppliers Name and Address:
Acron Paints
Unit 6, William Street, Northam
Southampton, Hants. S014 5QH
Tel: 023 80 223266 Fax: 08700 527587
Product Name/s:
Blast Primer

  1. Product Function

    A phenolic polyvinyl butyral resin based air dry primer. The product adheres well and provides protection to correctly prepared steel surfaces (before over-coating takes place). Blast Primer is suitable for application by airless or conventional spray (depending upon area size). This is a hard wearing primer which is economical, as the paint is still useable once the pot has been opened.

  2. Surface Preparation and Application

    Surfaces to be coated must be dry and clean ensuring that no grease remains. Degreasing may be carried out using Universal Thinners; maximum efficiency will be achieved using vapour degreasing. The product can be applied using conventional or airless spray equipment and can be adjusted for use with electrostatic spray equipment.

  3. Priming

    Mild Steel:Two Pack Self Etching Primer, Blast Primer or Zinc Phosphate
    Aluminum:Two Pack Self Etching Primer
    Stainless Steel & Zintec:Single Pack Etch Primer

  4. Properties

    Packaging1, 2.5, 5 and 25 litres
    Flash Point May occur between 22 to 32°
    Shelf Life12 months if stored in original container
    StorageStore in a cool dry place under temperatures of 10 to 15°C (in accordance with the highly Flammable Liquids and Liquified Petroleum Gasses Regulations 1972).
    CoverageOn a dry film thickness of 20 microns, conventional spraying will cover 6 to 8m² per litre.
    Drying TimesSurface Touch Dry : 5 minutes
    Hard Dry : 10 minutes
    Overcoat : 4 hours.
    These times are assuming that application takes place with an ambient temperature.
    Volume SolidsTypical values of 58 to 62% dependent upon viscosity.
    Product Weight1.0kg/litre.

This product should be stored and handled in accordance with good industrial hygiene practice and in conformity with any legal regulation. This information is to our best of knowledge correct and given in good faith but without warranty. It remains the users responsibility to ensure the information is appropriate for any particular use of the product.
Acron Paints March 2002Blast Primer

Acron Health and Safety

A printer friendly copy is available here A Technical Reference Datasheet is available here