Acron Paints

Acron Paints, Unit 6 William Street, Northam, Southampton, Hants. S014 5QH
Tel: 023 80 223266 Fax: 08700 527587

Material Safety Data SheetRevision No.3/2002
 
Suppliers Name and Address:
Acron Paints
Unit 6, William Street, Northam
Southampton, Hants. S014 5QH
Tel: 023 80 223266 Fax: 08700 527587
Product Name/s:
2pk Etch Reducer 90/0054
  1. Identification of Substance/Company Information

    Two Pack Etch Reducer 90/0054

    Company Information: As above

  2. Composition/Information on Ingredients

    Hazardous Ingredients / PigmentsCAS NoProportion (%)
    Propan-2-ol (h.1)67-63-030 to 60
    n-Butanol71-36-330 to 60
    Phosphoric Acid7664-38-25 to 10

     LTEL
    8 Hours
    STEL
    10 Minutes
    OES Mixture:50ppm (150mg/m³50ppm (150mg/m³
    M.E.L. Chromium0.5mg/m³ 

    Non Hazardous Components: Polyvinyl Butyral Resin.

  3. Hazards Identification

    COSHH Assessment : Maintain adequate ventilation and / or extraction to maintain vapour below OES or respiratory equipment will be required.

    Overexposure Effects :

    Skin Contact : Will defat the skin causing irritation and redness after prolonged or repeated contact. Risk of solvent absorption into the bloodstream.

    Eye Contact : Irritation.

    Ingestion : Sore throat and symptoms of inhalation.

    Inhalation : Excessive quantities may cause headaches and drowsiness. Continued exposure will have a narcotic effect leading eventually to unconciousness.

    CHIP Labelling Info : "Paint Preparation Containing n-Butanol and Isopropanol.

    Risk Phrases : R11 Highly Flammable. R20 Harmful if swallowed. R36/37 Irritating to the eyes and respiratory system.

    Safety Phrases : S9 Keep container in a well ventilated place. S16 Keep away from sources of ignition - no smoking. S33 Take precautionary measures against static discharges.

  4. First Aid Measures

    Inhalation : Move the exposed person to fresh air at once. Perform artificial respiration if breathing has stopped. Keep the affected person warm and at rest. Get prompt medical attention.

    Ingestion : Rinse mouth thoroughly. Do not induce vomiting. Get medical attention immediately.

    Skin : Remove affected person from source of contamination. Promptly wash contaminated skin with soap or mild detergent and water. Promptly remove clothing if soaked through and wash as above. Get medical attention promptly is symptoms occur after washing.

    Eyes : Promptly wash eyes with plenty of water while lifting the eyelids. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.

  5. Fire Fighting Measures

    Heating full containers will cause pressure rise with risk of bursting. Bursting cans can be forcibly ejected from a fire. Cans should be kept cool by using water spray. For liquid fire use Foam or co².

  6. Accidental Release Measures

    Packaging limits significant releases. Spills may be contaminated and absorbed in sand or inert material. Minor spills may be allowed to evaporate. Larger releases should be contained for controlled disposal.

  7. Handling and Storage

    Keep containers tightly closed in flammable store. Do not incinerate even when empty. Do not spray on or near a naked flame or incandescent material. Do not smoke, eat or drink whilst handling product. Prevent contact with eyes and skin.

  8. Exposure Controls and Personal Protection

    Use gloves and overalls to prevent contact with skin and eyes. Always ensure good ventilation and avoid inhaling vapours. In areas where OES may be exceeded, a self contained breathing apparatus should be used.

  9. Physical and Chemical Properties

    AppearanceViscous Liquid
    Flashpoint12°C
    VOC Content0.76 kg/lt
    Specific Gravity0.82+/- 0.02g/ml
    Explosive Limits in Air>1.0% <12.0%
    Solubility in WaterPartially soluble.

  10. Stability and Reactivity

    Product is stable and is not considered to have dangerously reactive properties. Will dissolve some plastics materials. Avoid contact with oxidising agents.

  11. Toxicological Information

    LD50 (Animal Ingestion) estimated from materials > 200mg/kg.

  12. Ecological Information

    This product does not contain materials considered to have an adverse effect on the environment warranting specific controls. Contamination of land and water courses should be avoided.

  13. Disposal Considerations

    Use licensed contractor for disposal by tipping or incineration.

  14. Transport Information

    UN Number1263Packing GroupIII
    Trem Card031IMCO Class3.2
    EMS3-07MFAG300
    ADR Class3 Item 31(C) 1IATA Class3

  15. Regulatory Information

    The Chemicals (Hazard Information and Packaging for Supply) Regulations 1994 Chemicals (Hazard information and Packaging for Supply) Amendment Regulations 1996. The Carriage of Dangerous Goods by Road and Rail (Classification, Packaging and Labelling) Regulations 1994. Control of Substances Hazardous to Health Regulations 1988.

  16. Other Information

    The information contained in this safety data sheet is provided in accordance with the requirements of the Chemicals (Hazard Information and Packaging) Regulations.

This product should be stored and handled in accordance with good industrial hygiene practice and in conformity with any legal regulation. This information is to our best of knowledge correct and given in good faith but without warranty. It remains the users responsibility to ensure the information is appropriate for any particular use of the product.
Acron Paints March 20022pk Etch Reducer 90/0054

Acron Health and Safety

A printer friendly copy is available hereA Technical Reference Datasheet is available here